1.) Computer design , automatic typesetting, saving original materials.
2.) Intelligent cutting blade :change cutting speed automatically
automatic side cut compensation ,ensure quality of final makers.
3.) The cutting head with cutting blade is specially designed, made
by extraordinary stainless steel, zero leakage of lubrication oil,
no need to add lubrication oil.
|Cutting thickness||Max. 75mm(vacuum suction)after vacuum suction, usually about 120
layers if cut knitted jersey fabric, about 50 layers if cut polar
fleece, about 200 layers if cut chiffon|
|Max cutting speed||60m/min|
|Cutting style||Straight Knife Continuous Up-down Cutting|
|Software||Automatic cutting system copyright|
|Sharpen way||double gear derogatory method|
|Air pressure supply||7 KPS|
|Max speed of blade working||4000rpm/min|
|Motor and driver of cnc system||YASKAWA Japan|
|Motor and driver of||SMC Japan|
1.) Machine body feeding parts of the installation of the encoder,
change the bed feeding error can be controlled within 1 mm. (due to
spreading thickness, using multi-layer fabric for cutting rate is
high, each 1 cm layer if the waste material, the single cut 100
layers will waste 1 meters of fabric, change the bed feeding
directly influences the precision of the material utilization rate,
if the change of bed precision, the whole must be cut by the origin
position. If the manual adjustment is not adjusted, will appear to
be scrapped or cut bite piece, larger spacing leads to waste
2.) High cutting accuracy, self -design of automatic sharp pen
cutter, high quality of cutter makes life longer.
3.) No need print out, save the typesetting, with high repeated
utilization, plate-making management is convenient.
4.) Easy to change the spare the spare part, and lower cost.
1.) I am new to CNC, how difficult are your machines to operate?
We help a lot of beginners in CNC, if you have a reasonable
knowledge of computers and are willing to spend a little time
learning it is not that bad .We can also offer installation and
operator training service upon request. Clients have to responsible
for the expenses on traveling, food and accommodation.
2.) How long is the delivery time?
For standard machines, it would be 15 days; For non-standard
machines and customized machines according to clients specific